What problems should be paid attention to when designing sheet metal cabinet

What problems should be paid attention to when designing sheet metal cabinet

Sheet metal cabinets are more and more widely used in communication engineering, data applications and other fields by virtue of their practicality, simplicity and beauty. However, a good quality sheet metal cabinet product is often inseparable from a good design. So do you know what problems should be paid attention to when designing sheet metal cabinets? The following ideas from our editor will introduce to you:

The following issues should be paid attention to when designing sheet metal cabinets:

  1. Protection design:

In order to ensure that the communication is not disturbed, it is necessary to consider anti-electromagnetic, etc., and indoor sheet metal cabinets must consider anti-drip, lightning protection, anti-corrosion, etc.

  1. Template design:

The formwork design of sheet metal cabinets should try to use common standard sizes in order to meet the wildcard selection in the market.

  1. Structural design:

The structure meets the requirements of using accessories, and there shall be no assembly interference phenomenon. On the premise of satisfying the performance, we must strive for good craftsmanship, such as choosing standard parts and general parts as much as possible.

  1. Modeling design:

The appearance of the sheet metal cabinet is to be beautiful and novel under the premise of satisfying the performance. In order to operate and use the equipment effectively, the structural design of the chassis must conform to the psychological and physiological characteristics of people, and it also requires a simple structure and easy assembly and disassembly. In addition, the controller and display device on the panel must be reasonably selected and arranged, and the personal safety of the operator must be considered.

  1. Structural technological design:

The structure and the process are closely related. Different structures have different processes, and the quality of the sheet metal cabinet structure design must be guaranteed by good process measures. Therefore, the designer of the sheet metal cabinet is required to consider its structural manufacturability in combination with the actual production.

  1. Ease of operation design:

In order to operate and use the equipment effectively, the structural design of the sheet metal cabinet must conform to the psychological and physiological characteristics of people, and at the same time, the structure is required to be simple and easy to assemble and disassemble. In addition, the controller and display device on the panel must be reasonably selected and arranged, and the personal safety of the operator must be considered.

  1. Technical indicators to achieve design:

When designing a sheet metal cabinet, it is also necessary to consider the influence of electromagnetic interference and heat between the internal components and components of the chassis to improve the stability of electrical performance. Attention must be paid to the strength and rigidity of the sheet metal cabinet to avoid deformation and electrical contact. Defective, doors, connectors stuck, or even damaged after vibration. In addition, it is necessary to take corresponding measures according to the actual working environment and use conditions to improve the reliability and service life of the equipment and ensure the realization of product technical indicators.

To sum up, these are some issues that should be paid attention to when designing sheet metal cabinets. In addition to paying attention to the above problems, in the design of sheet metal cabinets, we also need to pay attention to more details, make overall plans, and coordinate the relationship between the whole and the parts, so as to make the equipment look elegant, simple and beautiful, so as to gain market share.

Comments

No comments yet. Why don’t you start the discussion?

Leave a Reply